Do you need a new pool liner in Ann Arbor MI and surrounding areas? Please contact American Pool Service at (248) 352-9006 today for more information about our pool liner services in Ann Arbor MI.
Do’s and Don’t’s of Pool Liner Replacement
“Do It Yourself” projects can be enjoyable if you know exactly what you are working on. However, some projects should be left to the professionals to avoid costly and time consuming errors.
The vinyl liners of above ground and some inground pools need replacing from time to time. This will keep the pool looking beautufl and fresh. However, the process for liner replacement varies depending on the type of pool. This is one reason to use a pool professional to help replace your pool liner.
Changing your swimming pool liner might be one of those projects that should be left to the technical skills of a swimming pool professional. Your local pool professional has the expertise to know exactly what to look for and how to correct errors before they occur.
Measure Accurately Before Ordering
Factory sized swimming pool liners probably will not properly fit your unique backyard swimming pool. Have you heard the old adage, “Measure twice, Cut once”? There is a similar concept in installing a new swimming pool liner. However, if you measure the pool’s dimensions absolutely correctly there is no reason to ever cut the pool liner.
This is one of the areas that demonstrate that pool liner replacement should be left to a pool professional.
DO:
-
Have the necessary equipment before measuring the pool’s dimensions
-
Measure at least TWICE to verify measurements
To start, you need a vacuum pole, a tape measure and a plumb bob. That is even before you start to measure.
The pool water should be clean and clear to get the most accurate measurements. Remember to measure twice to make sure that you record the same measurement as before. If the measurements are not exactly the same, measure again. Make sure to measure the walls, pool depth (at the deepest point), and at any breaks or slopes. The clean pool water will help you see the measurements at the breaks and slopes.
DON’T:
-
Never install a new pool liner if the climate is too hot or too cold
-
Never cut a pool liner before the replacement
When you plan to install the pool liner also has a great deal to do with the measurements of the pool liner. Depending on the time of year that you plan to install your liner will change the measurements of the liner. The heat of summer makes the pool liner more malleable and appears to be not properly measured.
A pool professional knows all the ills that can arise from not measuring a pool liner correctly the first time and avoid the hassles of having to reorder the pool liner.
Swimming Pool Preparation
When replacing your pool liner, preparing your swimming pool structure is a very important part that is often neglected. An Ann Arbor MI pool liner professional would know what to look for and how to properly prepare that swimming pool for a liner replacement.
DO:
-
Smooth out the pool base surface
-
Replace broken or corroded joints and parts
Smoothing out all imperfections in the pool base is extremely important. For vinyl liner pool with a concrete base, fill and smooth any cracks in the foundations. For pools with a sand bottom base, remove all rocks and thoroughly smooth the surface. Any imperfection of the base will be accentuated after the liner has be replaced and the pool filled with water.
DON’T:
-
Do not forget to seal all joints
-
Do not forget to check for any cracks or leaks in the pool base
This is also the best time to inspect and replace any skimmer, covers or joints that may have become corroded or broken. At this stage it is a great idea the seal all panels. The last thing you want is your pool to lose water because of a leaking panel after replacing the liner.
Installing The Liner
Have you ever bought something that you needed to put together once you got it home? How many times do you use the directions as written? For the times you have followed the specific directions, did you get confused?
DO:
-
Follow manufacturer instructions
-
Check the weather forecast before install the new liner
Instructions for installing the pool liner will be in the box. This is where you and the pool professional have something in common in regards to installing pool liners. You both will need to read and follow the written instructions. The experience of the pool professional will make this a much easier job for them to perform.
Earlier, we discussed the idea that the weather affects the malleability of the pool liner. A darker color pool liner should be installed when it is cooler outside. Pool liners with a darker color base tend to absorb a lot of heat during the day and tend to stretch. However, don’t install the pool liner when it is too cold. The pool liner manufacturer may have an installation temperature stipulation in its warranty.
DON’T:
-
Do not overstretch the new pool liner
Attach the pool liner into the existing track. Make sure not to overstretch the pool liner. This can cause the material to lose the intended color and thickness. Check for wrinkles in the liner that need to be adjusted (without overstretching).
Filling the Pool
If you thought this was the easy part; think again. This is the most crucial and tedious step of the pool liner replacement. A vacuum is needed to smooth out any small wrinkles that can be unseen by the eye. Place the vacuum through the skimmer or between the pool wall and the liner. Make sure to seal the suction with duct tape. This is an extremely important step. Some wrinkles need to be smoothed out by hand. Since the pool liner is under the influence of vacuum pressure this can be difficult. If done wrong, this can tear the almost fully replaced pool liner.
DO:
-
Smooth out wrinkles while filling the pool with water
-
Cut the pool return and skimmer holes
It is best to cut the pool return and skimmer holes when the pool liner is held in place with a few inches of pool water. This is also a good time to smooth out any remaining liner wrinkles. A perfectly smooth pool liner will accentuate and showcase the liner design.
Filling the pool with water is the most anticipated step of the pool liner replacement. Rather than filling your pool with the hose, think about calling a water truck to fill the pool. This can fill your swimming pool in a fraction of the time it would take with a normal faucet and hose. Your local pool professional will have a relationship with a water truck provider in your area. This can save you time and allow you to enjoy your newly replaced swimming pool liner.
Once the pool is half filled, the vacuum can be turned off. All the wrinkles will have dissipated because the pool liner is now firmly in place.
DON’T:
-
Do not turn off the vacuum before the pool is half full
-
Do not try to fill the pool with house facet and hose
Now that you know details of the tedious and careful task of replacing a pool liner, you have to ask yourself a question: do I want to do this on my own? There is a reason that they are called pool professionals. You local pool professional can come out measure your pool accurately and install your new pool liner correctly.
Having an Ann Arbor MI pool professional install your new pool liner will save you time, as well as adding value to your home. source: swimmingpool.com
American Pool Service specializes in pool liners in Ann Arbor MI and surrounding areas. Call the top rated Michigan pool liner company today at (248) 352-9006!
